Automatic Fruit Juice Extracting Making Machine is used to make fruit or vegetable juice. This Screw Fruit Juice Making Machine is equipped with the screw and perforated screen assembly. The pressure for juice extraction can be adjusted in the pressure plate assembly. Thus juice and the waste get separated by the juice extractor and discharged respectively. Due to efficient juicing effect, the screw juicer machine is widely applied to make juice of many kinds of fruit and vegetables, such as apple, pineapple, orange, pomegranate, carrot, spinach, celery, tomato and so on. All the parts touching food are made of 304 stainless steel which can keep the juice clean and health.
Working Principe of Spiral Fruit Juice Extractor
Raw materials are fed into the feeding hopper and spirally pushed by the screw. Meanwhile, the volume of helical cavity reduces, materials are pressed by the boosting of the spiral. Thus the extracted juices will flow into the juice collector through the filter screen, and the material slags will be ejected through the ring interval formed between the spiral and the pressure adjusting taper part. The movement towards the axial direction can adjust the interval clearance so as to adjust the juice extracting rate.
Notice: fruits and vegetables processed by our screw juicer machine should be peeled and cored first.
Features of Juice Extractor Making Machine
- This is a kind of spiral advancing extrusion.
- There are whole stainless steel and inner stainless steel type.
- It can make vegetable and fruit juice.
- One outlet juice,one outlet fruit&vegetable pulp.
- Processing material is vegetable&fruit which is crushed into not more than 2*2cm size.
- We can supply you with different Filter screens according to your needs on the hole diameter.
Maintenance of Screw Fruit Juice Making Machine
- The machine should be installed horizontally, and fixed by ground screws.
- Raw materials should be fed evenly, and hard foreign materials are forbidden into feed hopper to avoid damaging filter screen.
- Bearings: Replace grease at regular intervals, and the normal temperature of bearings in operation is less than 75℃.
- Maintenance: The filler screen should be cleaned with water and brush after every shift of work.when process fruits with much fiber, filter screen should be cleaned twice.
Specification of Ginger Juice Extracting Machine
|Voltage||220V or 380V||220V or 380V||220V or 380V|
|Filter Screening Hole Size||0.6mm||0.6mm||0.6mm|
|Material||304 Stainless Steel||304 Stainless Steel||304 Stainless Steel|